Magneta ® – impulse sealers

The Sealmaster Magneta® series consists of a complete range manually operated impulse sealers with different sized models and options. This user friendly and safe machine is ideal for packing small and medium sized series. The machine can work with pre-made bags as well as with tubular film.

When working with tubular film, the machine can produce various length bags by using the integrated shielded cutting device.

Standard

MAGNETA MG

The sealing cycle of the machine can easily be started by pushing down the seal bar by hand or by using a foot pedal. Once started the magnetic bars remain closed throughout the sealing and cooling cycle and then automatically open, ready to make the next seal.

The machine is suitable to seal polyethylene, polypropylene and thin laminates. Cooling times are adjustable.

Twin seal

MAGNETA MGT

The twin seal model of the Magneta is equipped with two parallel sealing bars. The cutting device will cut the film in between the two sealing bars. With a switch the second sealing bar can be turned off, so the machine can also be used as a standard machine. Only on the 321 model the second seal bar can not be switched off.

Stainless steel

MAGNETA MGS

The MGS model of the Magneta is made out of stainless steel for special applications like the food industry or for violent environments. The MGS has a stainless steel housing and accessories. All the other characteristics are identical to the standard model. The options like the support table and the support are also available in stainless steel.

MORE INFORMATION

With Motor

MAGNETA MGM

The MGM is Audion’s latest development on the Sealmaster Magneta series, which has conquered the market successfully. The MGM sealer is powered by an electrical motor and equipped with an electrical foot switch. This special system enables you to close the sealing jaws with a gentle push on the pedal. The seals are from a consistent and reliable quality. Almost all Sealmaster Magneta models can be supplied as MGM version and the options also apply to the MGM models.

MORE INFORMATION

5 mm. seal

MAGNETA MG(M)I

The MGMI model of the Magneta is equipped with a motor and a 5mm wide seal instead of the standard 3mm wide seal. The seal wire from this model is fastened with tensioners in order to prevent the dilution of the wire.

5 mm seal and motor

MAGNETA MGMIDS

The MGMIDS is a Sealmaster Magneta with motor closure, a 5 mm seal and two sealing bars; one in the machine and one in the push bar. Because of the heat coming from both sides (bi-active), the sealer is more powerful than the standard machine, so you will be able to seal film up to 2 x 0,25 mm thick.

As accessory to this machine, the ANGLE DEVICE can be supplied which places the machine in an angle (steep and less steep, as shown in the picture). This accessory can only be used in combination with an MGMI or an MGMIDS. Also shown on the picture is an in height ajustable bag support which is convenient when sealing heavy bags.