Powerful explosion-proof steam impulse sealer for ultimate product safety
Audion’s tabletop steam impulse sealer is a unique type of sealer that makes it possible to seal bags without electrical power. The machine is available with 610, 800 or 1000 mm sealing length.
The sealer uses pressurized steam as a heat source. During the sealing process, the steam is brought under pressure in the sealing tube on the lower sealing bar. The sealing temperature corresponds to the pressure of the steam supply.
This steam impulse sealer is explosion proof because it does not have its own ignition source and can be used safely for sealing products in hazardous areas. In a conventional production system, products must be transported from a hazardous area to a safe area for packaging.
By using the Power Sealer EX the products can be packed directly in the explosion sensitive area. This eliminates the need to transport the products to another area and makes the process more efficient.
- Machine can be used in explosion zone classification: zone 1 (class 1, division 1) or zone 2 (class 1, division 2)
- The PSR EX is also available with a vacuum system: VAC PSR EX (610, 800, 1000).
Standard features
- Tabletop model
- Sealing length (610, 800 and 1000 mm length)
- 8 mm seal
- Film thickness 2 x 200 micron
- Controlled via Air PLC controller
- Explosion-proof sealer that can be used in an ATEX / explosion-sensitive area
- Stainless steel housing
- Available with vacuum system: VAC PSR EX
- Steam heated lower sealing bar
- Emergency stop
- Foot operation
- Pneumatically driven
Additional requirements for this sealer
- Steam pressure regulator: for adjusting the supply pressure of saturated vapor to the sealer.
- Pressure gauge: for checking the pressure of saturated vapor at the interface point.
- Steam trap: for removing drained water.
- Vaper supply valve: for stopping vapor supply after operation.
- Bypass valve: for blowing and exhausting initial air, drain, etc.
- Safety valve: needed when primary steam pressure is more than 1.0 MPa.
Options
- Support
- Working table
- Steam pressure generator
- Piping system for steam supply and drain
Markets
ATEX / Explosive environment
Specifications
Produit | Power Sealer Ex |
Longueur de soudure | 65 mm / 800 mm / 1000 mm |
Largeur de soudure | 0,7 mm |
Type de machine | Stoom impulse sealer |
Modèle | Sur Pieds |
Revêtement | Époxy |
Couteau | Oui |
Pédale de commande | Oui |
Type de film | |
Épaisseur du film | 2 X 100 mm |
Système à vide | Éjecteur à vide |
Panneau de contrôle | Contrôleur Air PLC |
Dimensions machine sans support (l x l x h) | 780 x 558 x 312 mm |
Contrôle de la barre de soudure | au moyen d’une bouteille d’air comprimé |
Alimentation en air requise | 0.55 MPa |
Alimentation en vapeur requise | 0.3 – 0.8 MPa (selon la température de soudure requise) |
Vitesse de la vapeur | > 10 kg/h |
Temps de vide | ± 1 – 20 sec |
Température de soudure | ± 130 – 175 °C |
Temps de soudure | ± 1 – 20 sec |
Temps de refroidissement | ± 3 sec (valeur fixe) |
Branche/Application | |
Type de produit | Producten in explosieve ruimte |