The Pandyno works with a filling chute covered with tube film. Instead of a knife the Pandyno uses a cold cutting wire which achieves a clean straight cut.
Instead of two sealing bars the machine has one (industrial) sealing bar with circa 5 mm seal width and has an extra timer to set the cooling time to set the cooling time needed to get a good seal. The seal cycle will start once the operator has pushed the sealing bars where they will be held in closed position by a magnet.
Standard filling chutes
Reference Film Width in mm Product passage – Internal dimensions
PD K08 8 39 x 29 mm
PD K10 10 59 x 26 mm
PD K12 12 77 x 31 mm
PD K15 15 93 x 31 mm
PD K20 20 129 x 50 mm
PD K30 30 197 x 68 mm
Length of all filling chutes: 650 mm.
ca. 15 mtrs. of tube film can be put on the filling chutes
Audion uses affiliate marketing cookies. If you have come to our Website through one of our affiliates, it may be that the affiliate receives compensation from us. The affiliate cookies enable us to determine which affiliate has directed you to our Website.